portable electronics aap600 ? copyright 2009- asic advant age, inc. C aads 00020/ aa572 - preliminary - rev. 3 - may 201 0 1 / 5 aap600 preliminary dat a automotive electret condenser microphone pre-amplifier description the aap600 is part of aais new family of specialty products for portable electronics applications, in this case aimed at two terminal ecms requiring integrated pre-amplfiers. the aap600 ecm pre-amplfier offers ultra low noise, require low current and feature ultra low input capacitance. the aap600 is offered with a fixed gain of 32db and an output operating voltage of 3.5v. the aap600 will be offered in a chip scale smd package. the package size is 1.09mm x 1.12mm, with an overall height of 350m including solder bumps. this extremely small package size and aspect ratio is optimum for use in small diamter microphones. available for purchase in either waffle pack for low volume orders or in tape & reel for larger quantities. features ? high tolerance to rfi, 8kv esd tolerance ? 1.8v rms equivalent input noise (a-weighted values) cmic = shorted. ? 0.25% thd typical for output swing = 200mv peak to peak. ? 7.2v C 12v supply voltage range ? 3.5v output operating voltage ? 32db gain ? suitable for small microphones down to 3mm diameter ? high pass filter pin configuration: 5-lead micro smd aap600 shown f rom t he t op and bot t om. numbers indicat e bat ch id and gain. downloaded from: http:///
portable electronics aap600 ? copyright 2009- asic advant age, inc. C aads 00020/ aa572 - preliminary - rev. 3 - may 201 0 2 / 5 typical circuit application typical test conditions downloaded from: http:///
portable electronics aap600 ? copyright 2009- asic advant age, inc. C aads 00020/ aa572 - preliminary - rev. 3 - may 201 0 3 / 5 maximum ratings parameter symbol parameters units conditions min. max. applied voltage (all pins) 5.5 v max voltage between pin and gnd esd v esd,out 8000 v out terminal v esd 2000 other terminals operating ambient temp -40 85 oc storage temp range -40 100 oc performance operating temp range -10 60 oc electrical characteristics unless otherwise stated: t=25oc, vdd=10v, v in =-50dbvrms / 9mvpp, r l =680 ? , c mic =10pf parameter symbol parameters units conditions min typ max operating supply supply voltage vdd 7.2 10 12 v operating output voltage v op 3.35 3.45 3.55 v supply current idd 5.7 9.7 12.5 ma psrr -50 db ac characteristics transfer function tf 31.5 32.5 33.5 db input referred noise e n 1.8 v rms input shorted to gnd, a -wei g hted values lf cutoff f low 200 hz hf cutoff f high 20 khz total harmonic distortion thd 0.25 % output signal=200mvpp input capacitance c in 1 pf vin(dc) = 0v input impedance z in 1 g ? output impedance z out 25 ? downloaded from: http:///
portable electronics aap600 ? copyright 2009- asic advant age, inc. C aads 00020/ aa572 - preliminary - rev. 3 - may 201 0 4 / 5 ordering ? pn ? subgroup ? description ? temp. ? range ? package ? packing ? type ? packing ? qty ? aap600 ? s \ m6a \ g \ lf \ w ? microphone ? ecm ? interface ? pre \ amplifier, ? 32db ? gain ? s ?\? special ? \ 10c ? to ? +60c ? 6 \ pin ? micro ? smd ? waffle \ pack ? 400 ? aap600 ? s \ m6a \ g \ lf \ tr ? microphone ? ecm ? interface ? pre \ amplifier, ? 32db ? gain ? s ?\? special ? \ 10c ? to ? +60c ? 6 \ pin ? micro ? smd ? t&r ? 3500 ? ordering information package dimensions and marking downloaded from: http:///
portable electronics aap600 ? copyright 2009- asic advant age, inc. C aads 00020/ aa572 - preliminary - rev. 3 - may 201 0 5 / 5 the following is a brief overview of certai n terms and conditions of sale of produc t. for a full and complete copy of all the general terms and conditions of sale, visit our webpage http://www.asicadvantage.com/terms.htm. limited warranty the product is warranted that it will conform to the applic able specifications and be free of defects for one year. buyer is responsible for selection of, use of and resu lts obtained from use of the product. buyer indemnifies and holds asic advantage, inc. harmless for claims arising out of the application of asic advantage, inc.s products to buyers designs. applications described herein or in any catalogs, advertisements or other documents are for illustrative purposes only. critical applications products are not authorized for use in critical applications including aerospac e and life support applications. use of products in these applications is fully at the risk of the buyer. critical app lications include any system or device whose failure to perform can result in significant injury to the user. lethal voltages lethal voltages could be present in the applications. please comply with all applicable safety regulations. intellectual property rights and proprietary data asic advantage, inc. retains all intellectual property right s in the products. sale of products does not confer on buyer any license to the intellectual property. asic advant age, inc. reserves the right to make changes without notice to the products at any time. buyer agrees not to us e or disclose asic advantage inc.s proprietary information without written consent. trademarks and patents - in-plug ? is a registered trademark of asic advantage, inc. - aais modified snubber network is patented under the us patent # 6,233,165 protection for custom solutions when aai accepts to design and manufacture products to bu yers designs or specifications, buyer has certain obligations to provide defense in a suit or proceeding clai ming infringement of a patent, copyright or trademark or for misappropriation of use of any trade secrets or for unfair competition. compliance with laws buyer agrees that at all times it will comply with all applicable federal, state, municipal, and local laws, orders and regulations. buyer agrees to comply with all applicable re strictions on exports and re-e xports including obtaining any required u.s. government license, author ization, or approval. buyer shall pay any duties, levies, taxes, brokerage fees, or customs fees imposed on the products. title and delivery all shipments of goods shall be delivered exworks, sunnyvale, ca, u.s.a. title in the goods shall not pass to buyer until asic advantage, inc. has received in full all amounts owed by buyer. latest datasheet updates for the latest datasheet updates, visit our web page: http://www.asicadvantage.com. worldwide representatives to access aais list of worldwide representativ es, visit our web page http://www.asicadvantage.com. copyrights copyrights and all other proprietary right s in the content rests with asic adv antage inc. (aai) or its licensors. all rights in the content not expressly gr anted herein are reserved. except as ot herwise provided, the content published on this document may be reproduced or distributed in unm odified form for personal non-commercial use only. any other use of the content, including without limitation distribution, reproduction, modification, display or transmission without the prior written consent of aai is strictly prohibited. all copyright and other proprietary notices shall be retained on all reproductions. asic advantage inc . 1290-b reamwood ave, sunnyvale california 94089, usa tel: (1) 408-541-8686 fax: (1) 408-541-8675 website: http://www.asicadvantage.com downloaded from: http:///
|
